|
|
|
|
|
|
|
|
|
| |
 |
Fluorinated Ethylene Propylene (FEP) Coating Coating/Paint
|
|
| |
For Details, Click Here to Send Us an Inquiry At: sales@epoxy-paint.cn to see if this Fluorinated Ethylene Propylene (FEP) Coating is right for your application. |
| |
 |
| |
Fluorinated Ethylene Propylene (FEP) Coating
FEP (fluorinated ethylene propylene) nonstick coating melts and flows during baking to provide smooth non-porous films and better abrasion resistance. Because the coating is non-porous its chemical resistance is superb. FEP coatings are extremely non-wetting and have a very low coefficient of friction. This coating has excellent release properties and is often used as a mold release coating. FEP coatings can withstand a maximum use temperature of 450°F. This coating is typically applied to a thickness of 1-2 mils.
Contact us to see if a FEP coating is right for your application.
Fluorinated Ethylene Propylene (FEP) Coating Statistics |
Tensile Strength (ASTM D1708) |
3400 psi |
Elongation (ASTM D1457) |
325% |
Impact Strength (ASTM D256) |
no break |
Hardness (ASTM D2240) |
56 HB (shore D) |
Abrasion Resistance (Tabor) |
14.8 mg |
Coefficient of Friction (ASTM D1894) |
.12 -.20 static, .08 -.3 dynamic |
Dielectric Strength (ASTM D149) |
1325 volts per mil |
Use Temperature |
450°F max |
Melting Point |
500°F |
Thermal Conductivity |
1.4 BTU-in/h-ft 2-°F |
Chemical Resistance (ASTM D543) |
Excellent |
Salt Spray Resistance (ASTM B117) |
good |
Water Absorption (ASTM D570) |
< .01% |
Thickness |
.001" - .003" |
|
| |
| |
|
| |
|
| |
|
|
| | |
|
| | |
 |
 |
 |
| All Rights Reserved by
Feiyang ® Honest Joy Coating/Paint | |
 | |
|
.gif)
.gif)
