|
|
|
|
|
|
|
 |
High Durability Thermosetting Polyester Enamel
|
|
For Details, Click Here to Send Us an Inquiry At: sales@epoxy-paint.cn to see if this High Durability Thermosetting Polyester Enamel is right for your application. |
|
 |
|
ADVANTAGES
* Offered in a wide variety of solid colours and metallic finishes.
* Available as tinting bases in high gloss, semi-gloss and satin finishes
(system "P").
* Suitable for interior and exterior use.
* Can be baked at temperatures between 205°F and 400°F without gloss or
colour change.
* Meets AAMA 603.8 and CGSB 1-GP-300 specifications.
USES
Can be used on aluminum extrusions, household appliances, shelves, office
furniture, toys and many other articles.
STORAGE
This product may be stored for a minimum period of 12 months in its original
unopened container at a maximum temperature of 35°C (95°F).
RESTRICTION
Do not apply directly on a non-chemically treated metal.
Tinting system "P":
Base Description % filled before tint
470-001 white high gloss 90
470-003 clear high gloss 80
470-101 white semi-gloss 90
470-103 clear semi-gloss 80
470-105 white satin 90
470-106 clear satin 80
The tinting system uses the colorants of series 413.
DRY FILM PROPERTIES
Tests performed on a #26 gauge Alodine A-1200S treated
aluminum panels at a dry film thickness of 1.0-1.2 mils
(25-30 microns).
Adhesion to the substrate: 100% 5B ( ASTM D-3359B)
Hardness: 2H-4H (ASTM D-3363)
Gloss (60°): 15±5° / 50±5° / 90° to 97°
(ASTM D-523)
Flexibility: 3 mm mandrel (ASTM D-522)
Impact resistance: (ASTM D-2794)
. Direct: 20 in./lb
. Reverse: 20 in./lb
Humidity resistance: Humidity cabinet (ASTM D-1735)
Exposure: 1500 hours.
. Blistering: none
. Adhesion: 100% (5B)
. Notation ASTM D-1654: 10 (excellent)
Corrosion resistance: Salt spray (ASTM B-117)
Exposure: 1500 hours.
. Blistering: none
. Adhesion: 100% (5B)
. Creepage: none
. Notation ASTM D-1654: 10 (excellent)
Colour and gloss retention:
Q.U.V. method (ASTM G-53)
. Lamp: UVA 340
. Cycle: 8 hours light / 4 hours condensation
. Temperature: 60°C/40°C (140°F/104°F)
. Exposure: 2000 hours
White Red Blue Black
Gloss initial 94° initial 97° initial 95° initial 97°
retention final 87° final 90° final 88° final 89°
Colour change ÄE : 1.2 ÄE : 0.9 ÄE : 0.8 ÄE : 0.7
LIQUID CHARACTERISTICS
Viscosity delivered at 25°C (77°F): 45-65 sec. Ford cup #4
(140 to 240 cps)
Solids weight (ASTM D-4909): 55±2%
Solids volume (ASTM D-4909): 47±1%
VOC: 410-460 g/litre (3.4-3.8 lbs/US gal.)
Polarity: 0.75±0.25 megohm
Spreading rate(1): 18.5 m2/litre (750 ft2/US gal.)
(1) Calculation based on minimum volume solids at a dry film thickness of
1 mil (25 microns).
SURFACE PREPARATION
* Surface must be clean and dry, free of dust, oil, grease or any other
contaminant.
* The surface should be chemically treated with iron or zinc
phosphate.
* If the surface is not chemically treated, the vinyl wash primer 360-
535 should be used.
MIX AND DILUTION
Use the diluent 400-011 (10 to 25% by volume), depending on
application.
APPLICATION METHOD
* Conventional air spray
* Hot spray and airless
* Electrostatic spray
* Disc or bell spray
Application recommendations:
* Do not exceed a dry film thickness of 2 mils (50 microns) per coat.
Solvent popping may occur if a heavy coat is baked.
* Application temperature: 15-30°C (59-86°F).
* Dry film thickness: 2 mils (50 microns).
BAKING SCHEDULE
Flash off: 5 minutes minimum.
a) Baking of 10 minutes at 175°C/350°F (metal temperature):
for optimum performance.
b) Baking of 20 minutes at 150°C/300° F (metal temperature):
hardness and chemical resistance moderately affected.
CLEAN UP
Clean equipment immediately after use with the 300-011 lacquer
thinner or an equivalent.
SAFETY MEASURES
Warning:
This product contains organic solvents and may contain lead-based
pigments.
Refer to safety data sheet and product label for more details. |
|
|
|
|
|
|
|
|
| |
|
| | |
 |
 |
 |
All Rights Reserved by
Feiyang ® Honest Joy Coating/Paint | |
 | |
|