|
Clear Acrylic Metal Lacquer
Clear Acrylic Metal Lacquer is designed for use on metal surfaces for industrial product finishing.
Key Features
- Fast air drying.
- Full gloss.
- Can be used on aluminum, brass, copper, and other nonferrous metals.
- Offers the best durability on exterior applications.
●Excellent resistance to weathering
●High resistance to sea water and oil
●Excellent resistance to abrasion
●Compatibility with all various coating systems
●Quick drying
●Chlorine-free
TECHNICAL DATA
Color(s) White and Other colors
Mixing ratio Ready to use
Solids content 56+3%(White)
Specific gravity 1.20(White)
Film thickness Dry:30-50 microns/coat(white)
Wet:75-125 microns/coat(white)
Spreading rate Theoretical:0.120kg/㎡/40microns(white)
Practical:Various depending on surface conditions, environment, applications,etc.
STORAGE
Shelf temperature -5℃-40℃
Shelf life 1 year
Flash point Greater than 40℃
APPLICATION DATA
Application methods
Airless spray,air spray,bush and roller
Airless spray Recommended
Nozzle tip 0.021-0.023
Fluid pressure 100-150kg/cm2
Thinning 0-15%by volume
Thinner Cordacry Thinner
Application temperature 5℃-35℃
Drying time&Overcoating interval
Temperature(℃) 5 10 20 30
Dry to touch(mins) 60 45 30 20
Dry hard(hrs) 6 4 3 2
Min.interval(hrs) 12 8 6 4
PAINTING SYSTEM
Preceding coat Cordchilor Pr,Cordepoxy Pr systems .
SURFACE PREPARTION
●The primer surface should be clean,dry and free of all contamination
●Observe the over coating intervals specified for the primer.
|