|
|
|
|
|
|
|
 |
Chlorinated Rubber Anticorrosive Primer
|
|
For Details, Click Here to Send Us an Inquiry At: sales@epoxy-paint.cn to see if this Chlorinated Rubber Anticorrosive Primer is right for your application. |
|
 |
|
INTENDED USES General anticorrosive primer based on chlorinated rubber for steel structure
CHARACTERISTIC
●Excellent resistance to corrosion
●Very good adhesion to various substrates
●Quick drying
●Excellent resistance to sea water and cathodic protection
●Can be overcoated with both chlorinated rubber and oleoresious topcoats and various antifoiling paints
TECHNICAL DATA
Color(s) Oxide Red,Silver
Mixing ratio Ready to ues
Solids content 62%(Oxide Red)
Specific gravity 1.30(Oxide Red)
Film thickness Dry:40-90microns/coat(Oxide Red)
Wet:81-184 microns/coat(Oxide Red)
Spreading rate Theoretical:0.210kg/㎡/70microns(Oxide Red)
Practical:Various depending on surface conditions, environment,applications,etc.
STORAGE
Shelf temperature -10℃-40℃
Shelf life 1 year
Flash point Greater than 25.5℃
APPLICATION DATA
Application methods
Airless spray,air spray,brush and roller
Airless spray Recommended
Nozzle tip 0.021-0.023
Fluid pressure 100-150kg/cm2
Thinning 0-3%by volume
Thinner Cordchlor Thinner
Application temperature -10℃-40℃
Drying time&Overcoating interval
Temperature(℃) -5 5 10 20 30
Dry to touch(mins) 90 60 45 30 15
Dry hard(hrs) 10 6 5 4 2
Min.interval(hrs) 10 6 5 4 2
Max.interval(days) - - - - -
PAINTING SYSTEM
Applied substrates Bare steel or existing paints.
Preceding coat CORDZinc, or according to the coating systems of Colouroad.
Subsequent coat Cordchlor AF,Cordchlor L or according to the coating systems of Colouroad.
SURFACE PREPARTION
●Remove salt and other water-soluble contaminants by fresh water hosing.
●Degrease according to SSPC-SP1 solvent cleaning.
●Remove weld spatter and smooth weld seams and sharp edges.
●Remove rust,mill-scale and damaged shop primer by blasting to ISO Sa2.5(SSPC-SP10) or by power tooling to ISO St3.0.
●Remove dust and dirt by highpressure air before paint application.
●Be sure that the surface is clean and dry prior to application.
|
|
|
|
|
|
|
|
|
| |
|
| | |
 |
 |
 |
All Rights Reserved by
Feiyang ® Honest Joy Coating/Paint | |
 | |
|