| |
Line marking paint for: Old black top, concrete, wood, brick,
paving and certain existing thermoplastic and painted
lines. Roads, airport and airfield runways. Car parks,
factories and sports facilities.
• Resistant to abrasion
• Good medium for high reflectivity
• Chemical resistant
• Fast drying times
• Tested to BS6044 performance standard
• May be applied to most road surfaces
• Skid resistant
Turn to Stone Primer/Basecoat is a primer specifically for use under Turn to Stone Paint, the correct colour should be chosen to match the colour of your Turn to Stone Paint. Application: Apply one coat of Turn to Stone Primer/Basecoat, then overcoat with 2 applications of Turn to Stone Paint (see link to the right) following the manufacturers instructions. Do not apply when application and drying temperatures are likely to fall below 10°C. Coverage: Approximately 6 square meters per litre per coat. Turn to Stone Primer/Basecoat is available in 1 litre and 2.5 Litre sizes in the 8 shades which match the correct Turn to Stone Paint these are White Limestone, Grey Limestone, Buff Sandstone, Rich Buff Sandstone, Red Sandstone, Deep Red Sandstone, Grey Slate Stone and Green Fernstone. |
.gif)
.gif)
