|
|
|
|
|
|
|
|
|
| |
 |
Metallic Finishes and Enamel Coating Coating/Paint
|
|
| |
For Details, Click Here to Send Us an Inquiry At: sales@epoxy-paint.cn to see if this Metallic Finishes and Enamel is right for your application. |
| |
 |
| |
| Protects Steel from: |
|
|
- Exposure to chemical fumes
|
- Exposure to chemical spillage
|
|
| Uses: |
- Marine, industrial and rural environments
- Pumps, sumps, water tanks
- Chemical process plants
- Tanks, ships, dams, locks
|
| System Recommendations: |
- Atmospheric Service and Fresh Water Immersion
2 coats - STEEL IT White Vinyl Primer #6912
2 coats - STEEL IT Vinyl Finish #6905
-
- Marine Immersion
1 coat - Vinyl Wash Primer
2 coats - STEEL IT White Vinyl Primer #6912
2 coats - STEEL IT Vinyl Finish #6905
|
| Surface Preparation: |
- General use - sandblast from commercial (SSPC-SP-6) to near white (SSPC-SP-10) levels
- For immersion or exposure to chemicals - sandblast to full white (SSPC-SP-5)
- Anchor pattern cut and angular - 1.5 - 2.0 mils deep
|
| Film Thickness: |
- Normal use - 6 dry mils (4 coats)
- Severe use - 8 dry mils (above the peaks of the anchor pattern)
|
| Application: |
- Conventional spray techniques - use a DeVilbiss MBC or JGA spray gun with a 705 Air Cap and a FF Fluid Tip.
- Airless spraying - use a DeVilbiss JGB-501 airless gun combination with a Fluid Tip Orifice between 0.009" and 0.018".
|
| Drying Time: |
- Dry to the touch in 30 min.
- Recoat white #6912 in 3 hrs., STEEL IT #6905 in 6 hrs
|
| Coverage: |
- White primer #6912: theoretical coverage - 240 sq. ft./gal. at 1 dry mil.
- Stainless Steel #6905: theoretical coverage - 272 sq. ft./gal. at 1 dry mil.
|
| Thinning and Clean Up: |
- Thinning not recommended - only when mandatory
- Airless spray may require small amounts of MIBK
- Brush application can use MIAK or glycol ether acetates
- Clean up with ketones or ektone/aromatic mixtures
|
| Limitations: |
- Apply only when surface and ambient temperatures are above 40 deg. F
- Relative humidity must be less than 86%
- Surface temperature must be at least 5 deg. above dew point
|
|
|
STEEL IT |
STEEL IT |
|
|
White Vinyl Primer #6912 |
Vinyl Finish #6905 |
| Color: |
|
White |
Metallic |
| Sheen: |
|
Low gloss |
Low gloss |
| Total Solids: |
by weight |
27.5% |
39.0% |
|
by volume |
15.3% |
17.0% |
| Viscosity: |
K. U. |
60-70 |
65-75 |
| Weight (gal.): |
|
8.1 lbs. |
9.4 lbs. |
| Shelf Life: |
|
6 months |
6 months |
|
| |
| |
|
| |
|
| |
|
|
| | |
|
| | |
 |
 |
 |
| All Rights Reserved by
Feiyang ® Honest Joy Coating/Paint | |
 | |
|
.gif)
.gif)
