| |
1 It consists of special resin, foaming agent fire-proofing agent, carbonic agent, pigment and filler.
2、This product can protect the surface of steel structure indoors and outdoors. Due to its expansion at high temperature or fire and formation of fire-proof insulated layer, fire-proof limit can reach to 0.5-2.0 hrs.
Applications
As fire-proof protective coating on the surface of steel structure indoors and outdoors.
Technical Data
Finish:Matt
Colours:White
Volume solids:50%
Theoretical Coverage:0.5 m2/L(1 mm dry film thickness)
Flash point:38℃
Specific gravity:1.25 kg / L
VOC:450 g / L
Dry to tuch：Approx. 2 hours (20℃)
hard Dry ：Approx. 24 hours (20℃)
Safety
1、Packings are provided with applicable safety labels which should be observed. In addition, national or local regulations should be followed.
2、As a general rule, inhalation of solvent vapours or paint mist, and contact of liquid paint with skin and eyes, should be avoided. Forced ventilation should be provided when applying paint in confined spaces or stagnant air. Even when ventilation is provided, respiratory, skin and eye protection are always recommended when spraying paint.
Disclaimer
1、All information in this product data sheet is based on standard conditions and slight variation may occur with different conditions.
2、Any person using the product for any purpose other than that specifically recommended in this sheet without fist obtaining written confirmation from use as to the suitability of the product for the intended purpose does so at his own risk. Whilst we endeavour to ensure that all advice we give about the product.
3 All information in our company is subject to change without notice.
|
.gif)
.gif)
