|
|
|
|
|
|
|
|
|
| |
 |
Binder Flooring Decorative Coating/Paint
|
|
| |
For Details, Click Here to Send Us an Inquiry At: sales@epoxy-paint.cn to see if this Binder Flooring Decorative is right for your application. |
| |
 |
| |
1. PRODUCT NAME:
CCS Binder, Flooring - Industrial, Part A
Chemical Family: Epoxy resin mixture.
2. HAZARDOUS INGREDIENTS
NAME CAS No. TLV STEL PEL CONTENT
Epoxy resin 25068-38-6 none none none 75-85%
Epoxy resin (CGE) 2210-79-9 none none none 15-25%
reference section 7, Health Hazard Data for LD (50)
3. PHYSICAL DATA:
Boiling Point: >250 F Water/Oil
Distribution
Coefficient:
N/D
Percent Volatile: Negligible Solubility in
Water:
Minimal
Freezing Point N/D Specific Gravity: 1.3
Vapor Pressure
@ 20C:
N/D pH: N/D
Vapor Density Heavier
than air
Evaporation Rate: N/D
Odor Threshold N/D Odor Mild
Appearance Amber liquid
N/D = Not Determined
4. FIRE AND EXPLOSION HAZARD DATA:
HMIS Flammability Rating: 1 - (Slight Hazard)
Flash Point: > 250 F (PMCC)
Auto Ignition Temperature: N/D
Limits of Flammability: LEL: N/D UEL: N/D
EXTINGUISHING MEDIA:
CARBON DIOXIDE, FOAM, DRY CHEMICAL AND WATER FOG
SPECIAL FIRE & UNUSUAL HAZARDS: At high temperatures vapors
can cause pressure build-up in sealed containers. Use water to cool
containers exposed to fire. Self-contained respirator equipment and full
protective clothing required when smoke or fumes are generated.
Electrical grounding not recommended.
5. REACTIVITY DATA:
HMIS Reactivity Rating: 1 - (Slight Hazard)
STABILITY: This product requires another component to react at
room temperature. Excessive heat and fume generation can
occur if improperly handled. Not sensitive to mechanical impact.
INCOMPATIBILITY: Strong acids, strong bases. Amines and
mercaptains may initiate possible hazardous polymerization.
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide
and dioxide, aldehydes, various hydrocarbons from incomplete
combustion.
HAZARDOUS POLYMERIZATION: May occur is product is not
handled per instructions.
6. ENVIRONMENTAL AND DISPOSAL INFORMATION:
ACTION TO TAKE FOR SPILLS AND LEAKS: Wear appropriate
protective gear. Contain leak/spill. Salvage. Clean up residue with
absorbent material.
WASTE DISPOSAL METHOD: Handle disposal of waste material in
manner which complies with local, state, province, and federal
regulations. Landfill if solidified or incinerate at agency approved wastedisposal
facility.
7. HEALTH HAZARD DATA:
HMIS Health Rating: 2 - (Moderate Hazard)
Primary Route Of Entry: Dermal
Effects of Overexposure:
Skin Contact: Prolonged or repeated exposure may cause skin
irritation and redness. Skin sensitization or allergic
reaction may occur in some individuals.
Eyes: Contact may cause irritation, redness, tearing and
blurred vision.
Inhalation: No known health information on inhalation of vapors. At
higher temperatures fumes may be irritating and cause
sensitization.
Ingestion: Low oral toxicity.
LD (50) CAS 25068-38-6 11.4 g/kg (rat)
LD (50) CAS 2210-79-9 4 g/kg (rat)
Chronic: Prolonged or repeated overexposure may cause
sensitization or other allergic reactions. CGE is reported
to be mutagenic in vitro.
8: FIRST AID:
Inhalation: Remove victim from exposure. If difficulty with
breathing; administer oxygen and seek immediate
medical assistance.
Eyes: Flush with water, lifting upper and lower lids
occasionally for 15 minutes. Seek medical attention.
Skin: Wash with soap and water; get medical attention if
irritation persists.
Ingestion: Do not give liquid if victim is unconscious or very
drowsy; otherwise give no more than two glasses of
water or milk and induce vomiting with two tablespoons
of Syrup of Ipecac or by touching finger to back of
victim's throat. Keep victim's head below hips while
vomiting. Seek medical attention.
9. SPECIAL PROTECTION INFORMATION:
HMIS Personal Protection Rating: C (Safety Glasses, Gloves, Apron)
Ventilation: Ventilation is recommended. Air movement must be
designed to insure turnover at all locations in work area
to prevent build-up of heavy vapors.
Personal
Protection:
Use eye protection. Selection of specific items such as
gloves, boots and apron will depend on the operation.
10. ADDITIONAL INFORMATION:
DOT Proper Shipping Name: Epoxy resin mixture
DOT Hazard Class or Division: Not regulated
Identification Number: N/A
Packing Group: N/A
Labels Required: N/A
WHMIS Classification: Class D, Div. 2, Sub. B.
WHMIS Labeling: Stylized T
Storage Conditions: Keep containers tightly sealed. Store
in dry and cool areas. Avoid freezing
conditions.
Shelf life: Indefinite.
Special Instructions: Storage recommendations: Store at room
temperature. Do not allow to freeze. |
| |
| |
|
| |
|
| |
|
|
| | |
|
| | |
 |
 |
 |
| All Rights Reserved by
Feiyang ® Honest Joy Coating/Paint | |
 | |
|
.gif)
.gif)
