|
|
|
|
|
|
|
 |
Fluoropolymer Coating/Paint
|
|
For Details, Click Here to Send Us an Inquiry At: sales@epoxy-paint.cn to see if this Fluoropolymer is right for your application. |
|
 |
|
Fluoropolymer Coating
Fluoropolymer is a family of fluoropolymer coatings designed for use on various types of OEM components and fasteners. Most Fluoropolymer coatings contain PTFE or other types of lubricants and are applied in thin films.
Fluoropolymer coatings provide lubrication and controlled friction, wear resistance, heat resistance, nonstick and release properties and, at the same time, can also protect from corrosion.
Fluoropolymer coatings solve the problems created when the ideal material for use in engineering construction has the wrong surface properties. Parts made from materials with the optimum strength, weight and cost may corrode, seize or gall. Fluoropolymer coatings provide a working surface, tailored to the application.
Contact us to see if this coating is right for your application.
Fluoropolymer Coating Statistics |
Tensile Strength (ASTM D1708) |
4000 - 5000 psi |
Elongation (ASTM D1457) |
50% |
Impact Strength (ASTM D256) |
13 ft - lb/in |
Hardness (ASTM D2240) |
60 - 90 HB (shore D) |
Abrasion Resistance (Tabor) |
> 15 mg |
Coefficient of Friction (ASTM D1894) |
.15 - .35 static |
Dielectric Strength (ASTM D149) |
1400 volts per mil |
Use Temperature |
-100°F to 500°F max |
Melting Point |
n/a |
Thermal Conductivity |
n/a |
Chemical Resistance (ASTM D543) |
good |
Salt Spray Resistance (ASTM B117) |
excellent |
Water Absorption (ASTM D570) |
< .03 % |
Thickness |
.0008" - .002" |
Metal Coatings applications include Fluoropolymer Coatings
|
|
|
Clear Topcoat
INTENDED USES A fluoro clear based on fluoro resin and fatty isocyanate hardener for exterires.
CHARACTERISTIC
●Excellent color retention and gloss retention
●Good adhesion to epoxy primers and polyurethane
●Fast drying
TECHNICAL DATA
Color(s) uniformly、transparent
Mixing ratio two-pack(base/hardener=10/1)
Volume Solids 50%
Specific gravity 0.96
Film thickness Dry:20microns/coat
Wet:47 microns/coat
Spreading rate Theoretical:0.04kg/㎡/40microns
Practical:Various depending on surface conditions,environment,applications,etc.
STORAGE
Shelf temperature -5℃-40℃
Shelf life 1 year
Flash point Greater than 18℃
Enmal
INTENDED USES A high durable finish based on for exposed surfaces in non-Immersed areas
CHARACTERISTIC
●Outstanding resistance to weathering and gloss retention
●Excellent resistance to chemicals and salt fog
●Excellent resistance ro scrubbing and stain
TECHNICAL DATA
Color(s) White and Other colors
Mixing ratio Base/Hardener=7/1 (white,by wt,According to indicative proportion on the package)
Volume Solids 55%(White)
Specific gravity 1.28(White)
Film thickness Dry:30-50microns/coat(White)
Wet:55-90 microns/coat(White)
Spreading rate Theoretical:0.109kg/㎡/40microns(White)
Practical:Various depending on surface conditions,environment,applications,etc.
STORAGE
Shelf temperature -10℃-40℃
Shelf life 1 year
Flash point Greater than 23℃
|
|
|
|
|
|
| |
|
| | |
 |
 |
 |
All Rights Reserved by
Feiyang ® Honest Joy Coating/Paint | |
 | |
|