| |
1、It’s a two-component epoxy rust-inhibiting primer containing zinc phosphate corrosion inhibiting pigment.
2、Cured with polyamide.
3、It features tough film, high performance anticorrosion.
4、It can be painted on moist surface. (See Remarks).
Intended Uses
1、As a blast primer for temporary protection of steel blast cleaned on site.
2、As a general purpose primer for MCB’s epoxy and polyurethane series.
3、As a primer or an intermediate coat in paint system for container or a top coat on its interior surface.
4、On steel and other metal surfaces in moderately to severely corrosive environment.
5、Curing agent 9534, polyamide, is suitable for application in tropical and subtropical weather. Curing agent 9540, polyamide adduct, can be cured at low temperature.
Technical Data
Finish:matt
Colors:Grey (or other color available on request)
Volume solids:51%
Theoretical spreading rate:Approx. 10 m2/L (50 mIcron dry film thickness)
Temperature resistance: Maximum (dry): 140℃
Flash point:26℃
Specific gravity:1.3 kg / L
VOC :Approx. 434 g / L
Dry to touch:Approx. 3-4 hours (20℃ )
Fully cured:1 Week (20℃)
Safety
1. Packings are provided with applicable safety labels which should be observed. In addition, national or local regulations should be followed.
2.As a general rule, inhalation of solvent vapours or paint mist, and contact of liquid paint with skin and eyes, should be avoided. Forced ventilation should be provided when applying paint in confined spaces or stagnant air. Even when ventilation is provided, respiratory, skin and eye protection are always recommended when spraying paint.
|
.gif)
.gif)
